Novotechnik - New Very Robust Angle Sensors For Off-Highway and More
The RFE Series measures from 0 up to 360° and can be ordered with one—partially redundant— or two fully redundant— channels. Shock and vibration tolerances are 50 g and 20 g respectively. Temperature range is -40 up to +125°C. These sensors are suitable for safety-related applications according to ISO 13849 upon customer validation.
Southborough, MA… Novotechnik, U.S. introduces the RFE 3200 Series of resilient angle sensors. These are specifically designed to operate in demanding environments like off-highway equipment and other harsh environment applications where the RFE 3200 Series' ingress protection to IP69K, EMC immunity, decoupled sensor/magnet and other features/specs are essential.
The RFE Series measures from 0 up to 360° and can be ordered with one—partially redundant— or two fully redundant— channels. Shock and vibration tolerances are 50 g and 20 g respectively. Temperature range is -40 up to +125°C. These sensors are suitable for safety-related applications according to ISO 13849 upon customer validation.
Resolution of the RFE 3200 Series is 12— or 14— bits, depending on version and repeatability is ±0.1° or less. These devices meet or exceed 10 EMC standards, detailed in data sheet. MTTF is ≥ 397 years per channel. Outputs options are 4 to 20 mA, 0.25 to 4.75 V, 0.5 to 4.5 V, CANopen and CAN SAE J1939.
For more information contact Novotechnik U.S., Inc., 155 Northboro Road, Southborough, MA 01772 • Phone: 508-485-2244 • Fax: 508-485-2430 • Web: www.novotechnik.com/rfe32
Featured Product
REIKU's Cable Saver™ - The Most Versatile Modular Robotic Cable Management Solution
REIKU's Cable Saver™ Solution eliminates downtime, loss of revenue, expensive cable and hose replacement costs, maintenance labor costs. It's available in three sizes 36, 52 and 70 mm.
All of the robots cables and hoses are protected when routed through the Cable Saver™ corrugated tubing.The Cable Saver™ uses a spring retraction system housed inside the Energy Tube™ to keep this service loop out of harms way in safe location at the rear of the Robot when not required. The Cable Saver™ is a COMPLETE solution for any make or model of robot. It installs quickly-on either side of the robot and has been tested to resist over 15 million repetitive cycles.
REIKU is committed to providing the most modular, effective options for ensuring your robotic components operate without downtime due to cable management.
www.CableSaver.com
