MorpHex
From Kåre Halvorsen project on the Lynxmotion forums:
Sphere shaped hexapod that I plan to give the following features:
Roll freely like a ball
Have different sort of locomotion for moving in any direction
Variable inner-body dimensions
Transform from a sphere shape into a hexapod and vice versa
Walk like a hexapod
Project's summary on Robotee and original forum thread.
New Computer Vision Project Can Solve reCAPTCHAs With Over 99% Accuracy
From Google Online Security Blog:
Translating a street address to an exact location on a map is harder than it seems. To take on this challenge and make Google Maps even more useful, we’ve been working on a new system to help locate addresses even more accurately, using some of the technology from the Street View and reCAPTCHA teams.
This technology finds and reads street numbers in Street View, and correlates those numbers with existing addresses to pinpoint their exact location on Google Maps.
We show that this system is able to accurately detect and read difficult numbers in Street View with 90% accuracy.
Turns out that this new algorithm can also be used to read CAPTCHA puzzles—we found that it can decipher the hardest distorted text puzzles from reCAPTCHA with over 99% accuracy... ( cont'd ) ( full technical paper )
A World Of Hardware Startups
Upverter has a hardware startup master list and world map. Currently contains around 150 robotics companies, 500+ consumer hardware startups and a list of incubators, venture firms and everything else... ( cont'd )
Raspberry Pi Compute Module
From Raspberry Pi Foundation :
The compute module contains the guts of a Raspberry Pi (the BCM2835 processor and 512Mbyte of RAM) as well as a 4Gbyte eMMC Flash device (which is the equivalent of the SD card in the Pi). This is all integrated on to a small 67.6x30mm board which fits into a standard DDR2 SODIMM connector (the same type of connector as used for laptop memory*). The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2835 SoC (which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi), and designing the module into a custom system should be relatively straightforward as we’ve put all the tricky bits onto the module itself.
So what you are seeing here is a Raspberry Pi shrunk down to fit on a SODIMM with onboard memory, whose connectors you can customise for your own needs.
The Compute Module is primarily designed for those who are going to create their own PCB. However, we are also launching something called the Compute Module IO Board to help designers get started.
$99 MinnowBoard MAX With Intel Bay Trail-I SoC
From MinnowBoard :
MinnowBoard MAX is another open hardware embedded board we've developed to serve the needs of both the professional developer and hacker/maker community. Based on Intel's new Atom Bay Trail SoC platform, it offers a new generation of performance and features, but remains petite in size and cost.
Our entry-level SKU will be $99 MSRP, with additional board configuration options to be made available. All models will include 64-bit processors, USB 3.0, and Intel HD graphics with open source accelerated drivers for Linux, to just name a few of the new features!
$99 MSRP: E3815 (single-core, 1.46 GHz), 1GB
$129 MSRP: E3825 (dual-core, 1.33 GHz), 2GB
HDMI (micro HDMI connector)
1 – Micro SD SDIO
1 – SATA2 3Gb/sec
1 – USB 3.0 (host)
1 – USB 2.0 (host)
1 – Serial debug via FTDI cable (sold separately)
10/100/1000 Ethernet
The low-speed expansion port is a 2×13 (26-pin) male 0.1″ pin header.
SPI, I2C, I2S Audio, 2x UARTs (TTL-level), 8x GPIO (2x supporting PWM), +5V, GND
The high-speed expansion port is a 60-pin, high-density connector.
1x PCIe Gen 2.0 Lane, 1x SATA2 3Gb/sec, 1x USB 2.0 host, I2C, GPIO, JTAG, +5V, GND
Trimble Adds Unmanned Aircraft System to its Agriculture Portfolio for Aerial Imaging and Mapping
The Trimble UX5 system flies at 80 kilometers/hour (50 mph) and is stable in significant crosswinds and even light rain.
LMI Technologies Launches New Gocator All-In-One 3D Smart Snapshot Sensor
Gocator 3100 series delivers 3D point cloud acquisition, measurement, and control decision capabilities in a single package
LORD MicroStrain® Sensing Systems Introduces Cost-Effective Tactical-Grade GPS-Aided Inertial Navigation System
Achieves tactical-grade performance with the smallest and lightest package in its class
Humanistic Robotics Announces Product Launch and First Users of its Safe Remote Control System
Advanced, ergonomic controller utilizes HRI's proprietary SafetySenseTM technology
Online Robotics Certificate Program
The program is offered in an asynchronous format, which means you can study any time, any place. We also offer a "pay as you go" tuition option where students pay for each course as they complete it.
MMP Releases 48V DC Gearmotor: 18 IN Lbs of continuous torque at 782 RPM, 354 In Lbs Peak Torque
27 April 2012: "IP-54" Sealed, High Power, 48 Vdc Gearmotor Develops 18 Lb. In. Torque at 782 RPM
Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model #: MMP-D33-455D-48V GP81-03.7 - Accepting any 48 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 8.4" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, as shown on the attached Photo.
The output of this fully reversible gearmotor is rated for 18 IN-LBS continuous torque, at 782 RPM, and 354 IN-LBS Peak. Despite its compact size, and weight of approximately 10 pounds, it's an efficient design, requiring just 5.1 Amps at 48 Volts DC to generate its Full-Load Torque. This translates into longer battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 12v, 18v, 24v, 28v, 36v, 42v, 60v & 90 Volts are available.
MMP Inc Releases New 12V DC Gearmotor capable of 136 Lb In of torque aat 35 RPM, with IP54 Rating
03 Sept 2011: "IP-54" Sealed, Low Current, 12 Vdc Gearmotor Develops 136 Lb. In. Torque at 35 RPM
Midwest Motion Products, Inc. of Watertown, Minnesota, is pleased to announce the release of a new DC Gear Motor, the Model No. MMP TM57-12V GP52-124. Accepting any 12 Volt DC source, including solar or battery power, this robust Gear Motor measures just 2.24" in Diameter, by 7.76" long, and has a keyed output shaft of 12mm diameter by 25mm long. Easy mounting is accomplished with 4 "face mount" M5 threaded holes, equally spaced on a 40mm Dia. B.C.
The output of this reversible gearmotor is rated for 136 Lb. In. (15.3Nm) torque, at 35 RPM. Despite its compact size, and weight of approximately 4 pounds, it's an efficient design, requiring just 7.2 Amps at 12 Volts DC to generate its Full Load Torque. That translates into long life battery charge, very low noise operation, and lower costs for related drive electronics. Motor windings for 24V, 28V, 36V, 42V, 48V, 60V & 90 Volts are available.
This unique design is rated at an "IP 54" protection level for operation in harsh environments. Variable Speed control can be accomplished with our fully compatible Speed Controls, Model MMP 25A-12V, or
MMP Releases new 12V DC Gearmotor - 136 In Lbs torque at 140 RPM output speed
Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model # MMP-D33-455A-12V GP81-029 - Accepting any 12 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 9.25" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, is also available.
The output of this fully reversible gearmotor is rated for 136 IN-LBS continuous torque, at 140 RPM, and 1062 IN-LBS (120 Nm) Peak Torque. Despite its compact size, and weight of approximately 11 pounds, it's an efficient design, requiring just 28.6 Amps at 12 Volts DC to generate its Full-Load Torque. This translates into long battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 18v, 24v, 28v, 36v, 42v, 48v, 60v & 90 Volts are available.
Cloud Manufacturing
As the automation industry begins its reach into the cloud, manufacturing communities will not only improve productivity, they will begin to reclaim the prominence the industry once claimed in the economy.
Survey of Control System Integrators
Nearly all automation vendors rely on system integrator partners to take some percentage of their hardware and software products to market in the form of completely functional systems.
Records 2686 to 2700 of 2705
First | Previous | Next | Last
Featured Product
FAULHABER MICROMO - Game changer in logistics
Faster, more efficient, more sustainable - due to global competition in industry combined with booming online trade, transport structures in intralogistics are facing new challenges. The industries' answer: Automation. From storage to shipping, key work steps are being taken over by intelligent logistics robots, such as automatic storage and retrieval machines and driverless transport systems. To work efficiently and reliably around the clock, these robots need flexible and particularly compact drive solutions.
