Dronecode Project Receives Further Investments to Advance UAVs for Commercial Applications
Dronecode, a nonprofit organization who are developing a common, shared open source platform for unmanned aerial vehicles (UAVs), recently announced a key milestone. The organization have gained investments from 27 new member organizations, and has formed technical working groups in order to advance the Dronecode platform.
SAFE CEO: DOT Regulations for Autonomous Vehicles Should Leave a Wide Berth for Innovation, Improvements in Efficiency and Safety
In response to U.S. Department of Transportation (DOT) Secretary Anthony Foxxs announcement of pending regulations on driverless and connected cars, SAFE President and CEO Robbie Diamond issued the following:
Patti Engineering Hires Lead for Business Development in Texas
Certified Mitsubishi and Siemens integrator addresses large demand for integration and engineering support among manufacturing companies with new hire
Drones in Commercial Use
Several states and businesses are competing to become a test zone in hopes of gaining traction in what promises to be a mushrooming industry. Businesses and State agencies are promoting the technology to improve their operations. Soon the friendly skies will be filled with drones.
Robotic Glove Invented by NUS Researchers Helps Patients Restore Hand Movements
Lightweight and soft, EsoGlove detects muscle signals and guides the hand to perform rehabilitation exercises
ATX West - Digital Dynamics Announces SuperIOr® Controller for PLC Applications at ATX West 2016
Digital Dynamics, Inc., an industry leader in the design and manufacture of input/output (I/O) controllers for large industrial applications, today announced their PLC-programmable SuperIOr Controller, which can run various IEC 61131-3 programming languages such as ladder diagram (LD) or structured text (ST). AltaStream, Inc., experts in the field of industrial automation control systems, are partners in the project.
ATX West - Computrol to Discuss High-Mix Manufacturing and Lot Traceability at ATX West
Computrol, Inc., a world-class provider of mid- to low-volume, high-mix electronic manufacturing services to OEMs, will exhibit in Booth #334 at Advanced Manufacturing Expo & Conference (ATX West), scheduled to take place Feb. 9-11, 2016 at the Anaheim Convention Center in Anaheim, CA.
Getting Started with Collaborative Robots - Part 4 - Assess Your Potential Applications
Documenting the actual process will allow you to evaluate if the process can be automated. This will also give you a starting point on cell performance and improvement opportunities.
Smart 3D imager arrays - A new class of automated metrology sensor provides sophisticated in-process measurement, minimizing integration and infrastructure costs
FARO Technologies, Inc. (NASDAQ: FARO), announces highly-adaptable 3D imager arrays that promise to drive automated industrial manufacturing metrology processes to the next level.
S2C Expands Kintex UltraScale Prototyping Solutions for Consumer-based IoT and Other Small to Medium-Sized Designs
Single KU115 Prodigy Logic Module Well-Suited for Calculation-Intensive Applications
Velodyne LiDAR Pucks to Serve as 'Eyes' for NAVYA Driverless ARMA Shuttles; Initial Two-Vehicle Test Could Pave Way for Autonomous Mass Transit in Switzerland
Swiss Public Transit Provider PostBus Acquires First Two Fully Autonomous Electric Vehicles, Equipped with Compact VLP-16 LiDAR Sensors
SPIE Startup Challenge 2016 semi-finalists announced
Semi-finalists have been named in the annual SPIE Startup Challenge, where new entrepreneurs pitch their light-based technology products to a panel of venture capitalists and business development experts. Semi-final and final rounds are held at SPIE Photonics West in San Francisco in February, with finals open to the public.
Drone-World.com Liquidates Entire Stock of DJI Phantom 3 Standard Model Drones in Preference for Phantom 3 Professional and Adds Upgrade Kit for DJI Inspire 1 v2.0 & Pro
The Internets largest retailer of DJI Phantom drone systems focuses on providing top-tier products for serious enthusiasts and professional drone operators in 2016.
3DR Holdings, LLC and Rising Media, Inc. to Host Singapore's Premier 3D Printing and Robotics Event; January 26-27, 2016 at Suntec Singapore Convention & Exhibition Centre
3DR Holdings LLC and Rising Media, Inc. announced that they have purchased MecklerMedias Inside 3D Printing and RoboUniverse international events as equal partners and will continue to run all upcoming events as scheduled.
Marian Inc. to Exhibit at MD&M West
Marian Inc. will exhibit at the MD&M West Trade Show in Anaheim, CA February 9th through February 11th 2016 in booth #3444.
Records 2266 to 2280 of 2715
First | Previous | Next | Last
Featured Product
TM Robotics - Shibaura Machine THE SCARA range
The THE range from Shibaura Machine is an extensive line up of SCARA robots. Available in four arm lengths THE400 (400mm), THE600 (600mm) and the most recent THE800 (800mm) and THE1000 (1000mm), this range is suitable for assembly, handling, inspection and pick and place processes in varied industrial applications. The THE1000 boasts a 20kg payload capacity and an impressive 0.44 second cycle time, providing high speeds for processes with large components. In fact, the range has been recognised for as the price-to-performance leader compared to other SCARA models in its price range due to its impressive speed versus payload capacity.
