Algorithm that harnesses data from a new sensor could make autonomous robots more nimble.
MIT paper from Andrea Censi and Davide Scaramuzza:
The agility of a robotic system is ultimately limited by the speed of its processing pipeline. The use of a Dynamic Vision Sensors (DVS), a sensor producing asynchronous events as luminance changes are perceived by its pixels, makes it possible to have a sensing pipeline of a theoretical latency of a few microseconds. However, several challenges must be overcome: a DVS does not provide the grayscale value but only changes in the luminance; and because the output is composed by a sequence of events, traditional frame-based visual odometry methods are not applicable. This paper presents the first visual odometry system based on a DVS plus a normal CMOS camera to provide the absolute brightness values. The two sources of data are automatically spatiotemporally calibrated from logs taken during normal operation. We design a visual odometry method that uses the DVS events to estimate the relative displacement since the previous CMOS frame by processing each event individually. Experiments show that the rotation can be estimated with surprising accuracy, while the translation can be estimated only very noisily, because it produces few events due to very small apparent motion ... ( full paper )
Leap Motion V2 Tracking
From Leap Motion's developer blog :
V2 retains the speed and positional accuracy found in V1, but the software also now tracks the actual joints and bones inside each of the user’s fingers. This leads to some immediate benefits over V1:
Finger and hand labels – every finger, hand, and joint now has anatomical labels like ‘pinky’, ‘left hand’, and ‘proximal phalanges’
Occlusion robustness – fingers are tracked even when they’re not seen by the controller, as might happen if you turned your hands completely vertically or intertwined the fingers of your left and right hands
Massively improved resistance to ambient infrared light – sunlight, powerful halogens, etc.
Much more granular data for developers about the user’s hands and fingers – 27 dimensions per hand, in addition to special parameters like grab/pinch APIs
LORD MicroStrain Introduces New Family of 10°/hour Miniature Inertial Sensors
"The 3DM-GX4 family's 10°/hour gyro bias stability and industrial grade MEMS sensors clearly set them apart in the field of miniature inertial sensor systems."
DARwIn-mini
Available now at Maker Shed for $499 :
If you haven't checked out the amazing capabilities of the DARwIn-OP Deluxe Edition , you should! DARwIn-Mini is the younger, but no less amazing, sibling of this award winning robot. DARwIn-Mini is Dynamic Anthropomorphic Robot with Intelligence from Korea-based ROBOTIS kits, famed for their transformability and stunning humanoid designs.
Custom controller based on the 32-bit ARM Cortex M3
3D files of the robot’s parts at Thingverse
Parrot Bebop
From Parrot's official announcement today:
Today, after 5 years of development, we are excited to introduce you Parrot Bebop Drone, a ultra-light drone with a full HD camera digitally stabilized on its 3-axis.
Chris Anderson's and DIYDrones first look
IEEE Spectrum coverage
Press release pdf
Open Source Firmware for RC Radio Transmitters
From OpenTX:
OpenTX is open source firmware for RC radio transmitters. The firmware is highly configurable and brings much more features than found in traditional radios... ( cont'd )
Thumbles: Robotic Tabletop User Interface Platform
From Pattenstudio :
Thumbles is an interactive tabletop system based on a group of tiny robots that users can grasp and manipulate. Each robot can represent anything from character in a video game to a molecule in a scientific visualization. The system combines the versatility of a graphical interface with the tactile advantages of physical controls.
Golang Powered Robotics
From Gobot's homepage:
Gobot is a framework and set of libraries in the Go programming language for robotics, physical computing, and the Internet of Things... ( cont'd )
UBR-1 Available for Purchase
From Unbounded Robotics:
Beginning today, UBR-1 is available for purchase. To order your own state-of-the-art mobile manipulation platform please contact sales@unboundedrobotics.com.
The majority of requests we have had to date have been for the UBR-1 pro model, so we have decided to focus on and ship only one model. The cost of the UBR-1 is $50,000 and will include the newest Hokuyo UST-20LX scanning laser. UBR-1 now offers a higher maximum speed, a state of the art laser scanner, more RAM, and a larger hard drive capacity. In addition to the UBR-1 we are happy to announce that we will also be offering a ROS Ready Computer Package to make setting up your robot even easier. This package includes a computer with Ubuntu and ROS pre-installed, and a wireless router pre-configured to connect your robot and computer.
We are planning to start shipping robots to their destinations in late August... ( cont'd )
Magnetically Actuated Micro-robots For Micro-Factories
From SRI International:
SRI is developing new technology to reliably control thousands of micro-robots for smart manufacturing of macro-scale products in compact, integrated systems... ( cont'd )
MorpHex
From Kåre Halvorsen project on the Lynxmotion forums:
Sphere shaped hexapod that I plan to give the following features:
Roll freely like a ball
Have different sort of locomotion for moving in any direction
Variable inner-body dimensions
Transform from a sphere shape into a hexapod and vice versa
Walk like a hexapod
Project's summary on Robotee and original forum thread.
New Computer Vision Project Can Solve reCAPTCHAs With Over 99% Accuracy
From Google Online Security Blog:
Translating a street address to an exact location on a map is harder than it seems. To take on this challenge and make Google Maps even more useful, we’ve been working on a new system to help locate addresses even more accurately, using some of the technology from the Street View and reCAPTCHA teams.
This technology finds and reads street numbers in Street View, and correlates those numbers with existing addresses to pinpoint their exact location on Google Maps.
We show that this system is able to accurately detect and read difficult numbers in Street View with 90% accuracy.
Turns out that this new algorithm can also be used to read CAPTCHA puzzles—we found that it can decipher the hardest distorted text puzzles from reCAPTCHA with over 99% accuracy... ( cont'd ) ( full technical paper )
A World Of Hardware Startups
Upverter has a hardware startup master list and world map. Currently contains around 150 robotics companies, 500+ consumer hardware startups and a list of incubators, venture firms and everything else... ( cont'd )
Raspberry Pi Compute Module
From Raspberry Pi Foundation :
The compute module contains the guts of a Raspberry Pi (the BCM2835 processor and 512Mbyte of RAM) as well as a 4Gbyte eMMC Flash device (which is the equivalent of the SD card in the Pi). This is all integrated on to a small 67.6x30mm board which fits into a standard DDR2 SODIMM connector (the same type of connector as used for laptop memory*). The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2835 SoC (which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi), and designing the module into a custom system should be relatively straightforward as we’ve put all the tricky bits onto the module itself.
So what you are seeing here is a Raspberry Pi shrunk down to fit on a SODIMM with onboard memory, whose connectors you can customise for your own needs.
The Compute Module is primarily designed for those who are going to create their own PCB. However, we are also launching something called the Compute Module IO Board to help designers get started.
$99 MinnowBoard MAX With Intel Bay Trail-I SoC
From MinnowBoard :
MinnowBoard MAX is another open hardware embedded board we've developed to serve the needs of both the professional developer and hacker/maker community. Based on Intel's new Atom Bay Trail SoC platform, it offers a new generation of performance and features, but remains petite in size and cost.
Our entry-level SKU will be $99 MSRP, with additional board configuration options to be made available. All models will include 64-bit processors, USB 3.0, and Intel HD graphics with open source accelerated drivers for Linux, to just name a few of the new features!
$99 MSRP: E3815 (single-core, 1.46 GHz), 1GB
$129 MSRP: E3825 (dual-core, 1.33 GHz), 2GB
HDMI (micro HDMI connector)
1 – Micro SD SDIO
1 – SATA2 3Gb/sec
1 – USB 3.0 (host)
1 – USB 2.0 (host)
1 – Serial debug via FTDI cable (sold separately)
10/100/1000 Ethernet
The low-speed expansion port is a 2×13 (26-pin) male 0.1″ pin header.
SPI, I2C, I2S Audio, 2x UARTs (TTL-level), 8x GPIO (2x supporting PWM), +5V, GND
The high-speed expansion port is a 60-pin, high-density connector.
1x PCIe Gen 2.0 Lane, 1x SATA2 3Gb/sec, 1x USB 2.0 host, I2C, GPIO, JTAG, +5V, GND
Records 2686 to 2700 of 2715
First | Previous | Next | Last
Featured Product
ATI Industrial Automation - MC-50 Manual Tool Changer
With intuitive and ergonomic lever operation, the patent-pending MC-50 Manual Robot Tool Changer provides a simple solution for quickly changing robotic end-of-arm tooling by hand. This compact and robust Tool Changer is designed for applications on collaborative robots that support payloads up to 25 kg and small industrial robots supporting payloads up to 10 kg. Featuring an ISO 50 mm mounting interface on the Master-side and Tool-side, the low-profile MC-50 mounts directly to most cobots and seamlessly integrates with many common cobot marketplace grippers and end-effectors.
