Trimble Adds Unmanned Aircraft System to its Agriculture Portfolio for Aerial Imaging and Mapping

The Trimble UX5 system flies at 80 kilometers/hour (50 mph) and is stable in significant crosswinds and even light rain.

LMI Technologies Launches New Gocator All-In-One 3D Smart Snapshot Sensor

Gocator 3100 series delivers 3D point cloud acquisition, measurement, and control decision capabilities in a single package

LORD MicroStrain® Sensing Systems Introduces Cost-Effective Tactical-Grade GPS-Aided Inertial Navigation System

Achieves tactical-grade performance with the smallest and lightest package in its class

Humanistic Robotics Announces Product Launch and First Users of its Safe Remote Control System

Advanced, ergonomic controller utilizes HRI's proprietary SafetySenseTM technology

Online Robotics Certificate Program

The program is offered in an asynchronous format, which means you can study any time, any place. We also offer a "pay as you go" tuition option where students pay for each course as they complete it.

MMP Releases 48V DC Gearmotor: 18 IN Lbs of continuous torque at 782 RPM, 354 In Lbs Peak Torque

27 April 2012: "IP-54" Sealed, High Power, 48 Vdc Gearmotor Develops 18 Lb. In. Torque at 782 RPM Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model #: MMP-D33-455D-48V GP81-03.7 - Accepting any 48 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 8.4" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, as shown on the attached Photo. The output of this fully reversible gearmotor is rated for 18 IN-LBS continuous torque, at 782 RPM, and 354 IN-LBS Peak. Despite its compact size, and weight of approximately 10 pounds, it's an efficient design, requiring just 5.1 Amps at 48 Volts DC to generate its Full-Load Torque. This translates into longer battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 12v, 18v, 24v, 28v, 36v, 42v, 60v & 90 Volts are available.

MMP Inc Releases New 12V DC Gearmotor capable of 136 Lb In of torque aat 35 RPM, with IP54 Rating

03 Sept 2011: "IP-54" Sealed, Low Current, 12 Vdc Gearmotor Develops 136 Lb. In. Torque at 35 RPM Midwest Motion Products, Inc. of Watertown, Minnesota, is pleased to announce the release of a new DC Gear Motor, the Model No. MMP TM57-12V GP52-124. Accepting any 12 Volt DC source, including solar or battery power, this robust Gear Motor measures just 2.24" in Diameter, by 7.76" long, and has a keyed output shaft of 12mm diameter by 25mm long. Easy mounting is accomplished with 4 "face mount" M5 threaded holes, equally spaced on a 40mm Dia. B.C. The output of this reversible gearmotor is rated for 136 Lb. In. (15.3Nm) torque, at 35 RPM. Despite its compact size, and weight of approximately 4 pounds, it's an efficient design, requiring just 7.2 Amps at 12 Volts DC to generate its Full Load Torque. That translates into long life battery charge, very low noise operation, and lower costs for related drive electronics. Motor windings for 24V, 28V, 36V, 42V, 48V, 60V & 90 Volts are available. This unique design is rated at an "IP 54" protection level for operation in harsh environments. Variable Speed control can be accomplished with our fully compatible Speed Controls, Model MMP 25A-12V, or

MMP Releases new 12V DC Gearmotor - 136 In Lbs torque at 140 RPM output speed

Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model # MMP-D33-455A-12V GP81-029 - Accepting any 12 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 9.25" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, is also available. The output of this fully reversible gearmotor is rated for 136 IN-LBS continuous torque, at 140 RPM, and 1062 IN-LBS (120 Nm) Peak Torque. Despite its compact size, and weight of approximately 11 pounds, it's an efficient design, requiring just 28.6 Amps at 12 Volts DC to generate its Full-Load Torque. This translates into long battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 18v, 24v, 28v, 36v, 42v, 48v, 60v & 90 Volts are available.

Cloud Manufacturing

As the automation industry begins its reach into the cloud, manufacturing communities will not only improve productivity, they will begin to reclaim the prominence the industry once claimed in the economy.

Survey of Control System Integrators

Nearly all automation vendors rely on system integrator partners to take some percentage of their hardware and software products to market in the form of completely functional systems.

MMP RELEASES NEW 24V DC PLANETARY GEARMOTOR FOR ROBOTICS & AUTOMATION APPLICATONS

This is to announce our latest Product Innovation, the Model MMP D33-455D-24V GP81-029 DC Gearmotor. The fully reversible Gearmotor operates with a 24V DC Input, while consuming just 14 A of current. Adding to its versatility, the unit is designed with a rear shaft extension, and threaded mounting holes for an integrally mounted optical encoder. This unique design features a High Efficiency Planetary Gearing, High Output Power to size & weight ratio, Low Speed and Low Noise, in a Compact, Lightweight (Just 11 Pounds!) 24 Volt DC Gearmotor. Please find attached the Press Release, Technical Specification Sheet, and a Photograph of this exciting new "Built in the USA" product. Typical uses for this "Compact, Lightweight" 24 Volt DC Gearmotor would include Mobility & Accessibility Equipment, Autonomous/Robotic Vehicles, UGV's, UUV's, Alternative Energy Equipment, including Solar Tracking, Linear Actuators, Automotive Accessories, Material Handling Equipment, Moving Target Equipment, Rotating Signage, and battery powered Electric Utility Vehicles of all kinds. This unit is able to develop its full continuous output torque of 136 In Lbs. at 140 RPM, while consuming 28.6 Amps of current. That translates to a long life battery charge, quiet operation, and lower cost drive electronics, to mention just a few of the many benefits available to the user..

Industrial Robots with Image Processing in the Photovoltaic Industry

A 'seeing' robot can flexibly pick up, recognize and measure wafers, solar cells and even whole modules and then place the gripped objects with great precision and speed.

Adept Robotics for the Solar Industry

Todays ultra-thin solar cells require precise and gentle handling. And with the increasing demand on solar manufacturers for product, automation must deliver the highest throughput possible.

Zaber's New A-LST-C Series High Load, Motorized Linear Stages with Dust Covers

Zaber's A-LST-C stages are computer-controlled and have travel ranges from 254 mm up to 1500 mm. These stages are available with various lead screw pitches so you can select the device with the resolution and speed capability that you need. Zaber's innovative stage design is capable of speeds up to 420 mm/s, and can support loads up to 100 kg

Maxon's New ESCON 36/2 - A Powerful PWM Servo Controller

Maxon's new ESCON 36/2 DC is a 4-quadrant PWM servo controller for use with DC motors up to 72 Watt. This very fast digital current controller, with enormous bandwidth for optimal motor current/torque control, provides drift-free yet extremely dynamic speed behavior through a speed range of 1 to 150,000 rpm.

Records 2701 to 2715 of 2715

First | Previous

Featured Product

Oriental Motor USA - Ideal for AGV/AMR Applications

Oriental Motor USA - Ideal for AGV/AMR Applications

The BLV Series R Type brushless DC motor (BLDC motor) speed control system offers the design of motor and driver significantly reduced in size and weight, yet high-power, and contributes to the battery driven automation. The BLV Series R Type is compatible with the two interfaces of Modbus (RTU) and CANopen communication.