Robotic tool changer systems MPS for all payloads

Stäubli has decades of experience in Connectors and Robotics. The combined expertise of both Stäubli divisions goes into making our robotic tool changers technologically advanced and reliable, with performance that greatly enhances the productivity of automated production lines.  Recently Staubli introduced two compact fully automatic tool change systems, the MPS 130 and the MPS 260, for the medium payload segment, Stäubli Connectors rounds off the lower end of its existing series. The two new series are not only intended for applications in the automotive industry, but the advantages of the automatic gripper and tool changer should open up other markets. With the automatic tool changer, the application of robots can be significantly expanded and their efficiency and productivity increased.

Stäubli Connectors has paid particular attention to a weight-optimized design of the new tool changer so that users don’t have to invest in robots of the next highest payload category.  Thus the weight of the MPS 130 is only 1.8 kg on the robot side and just 1.1 kg on the tool side. With the larger MPS 260, these values are 3.8 and 2.2 kg. Although the changer may be light, it is not short on strength and resilience. The MPS 260 impresses with a maximum load of 350 kg and a bending moment of 2,000 Nm. The smaller MPS 130 has a maximum load of 100 kg and a bending moment of 900 Nm.

With the MPS 130 and the MPS 260, Stäubli Connectors now offers compact change systems for the medium payload range.
 

As with the larger models, the two new additions meet the strictest safety requirements according to safety category 3, performance level d. The tool changers can be equipped with customized  modules and components for media, data and electrical power transmission. To guarantee maximum reliability, Stäubli is the only manufacturer worldwide to develop and produce the complete changer single-handedly. The locking mechanism, the media module and the entire connection technology comes from a single source. The advantage is that all components are produced under an integrated quality management system in the highest production quality.

The content & opinions in this article are the author’s and do not necessarily represent the views of RoboticsTomorrow

Staubli Corporation

Stäubli is a leading manufacturer of textile machinery, quick release couplings and robotics systems. With a workforce of over 4500 employees Stäubli is present in 25 countries supported by a comprehensive distribution network in 50 countries worldwide. Stäubli's North American headquarters is located in Duncan, South Carolina and has over 200 employees supporting Textile, Connectors and Robotics customers, with a dynamic sales force strategically placed on the West Coast, Canada, Mexico, and elsewhere throughout the continent.

Other Articles

Multi-couplings reduce down time and improve efficiency

The multi-coupling system helped Eaton cut down on the time needed for switching hoses and connections by almost 40 percent.

Chinese cars in motion thanks to Stäubli connectors

Stäubli’s MPS tool changer provides JAC with flexibility and minimal technician intervention during the manufacturing process, particularly during the handling and welding processes. Water, air and electrical circuits can be connected and disconnected simultaneously.

Talking AUTOMATE 2023 with Stäubli

When you visit us at booth 2632, you will be able to experience a live demo of our robotic tool changer system, as well as our new end-of-arm-tooling solutions for material handling in automated manufacturing processes including gripping, suction, and cutting.

More about Staubli Corporation

Featured Product

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE. The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras. The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.

More Products

Feature Your Product